Category Archives: Windows

Knowing Window Ratings

The careful selection of windows is paramount to meet your budget and specific requirements of a place to resist unfavorable climatic exposures. Generally, Window ratings define cardinal performance standards that speak for the effectiveness of windows. Superb performance is ensured if the windows rate high on these criteria.

The ratings are as enumerated below:
• A with 3 levels spanning A1 to A3 specifying airtight aspect allowing for minimal or no air seepage
• B having 7 levels B7 to B1 defining the water resistance capability
• C through 5 levels of C1 to C5 laying down wind resistance standards
The windows are to be opted by ratings that conform to the ambient environmental state of your location. A trained window expert will extend adequate assistance in understanding the suitability of rating for your needs. Reputed manufacturers of window carry the rating after getting their products assessed by an independent authority.

Casement Windows versus Double Hung Windows

Casement Windows come attached with numerous mechanical parts that make them liable to fail early. Hinges, gears, cranks and other parts hinder the longevity of these windows. The windows’ tolerance towards natural onslaught like incessant rain, snowfall, windy gushes etc is deplorably less. Exposed to such severe climatic conditions, the casement windows will give in. The windows will be gradually loosened with passage of time paving the way for air intrusion in substantial amount in homes. Most casements would suddenly stop functioning without any previous notice. On a fine morning, you may find an absolutely perfect casement no longer in good shape.

Double hung windows are comparatively superior in performance that casements. The sash will snugly accommodate the base and two lateral sides of any double hung and the track will never permit their dislocation or distortion. The top may be vulnerable towards air seepage; however the loophole can be plugged with a good industrial sealant.

Modern Window and door options for your home

For house to look perfect there must be proper ventilation which can be obtained when the selection of doors and windows is done properly. If the doors and windows are proper then it will allow free flow of light and air due to which the electricity bills are going to reduce. Best option for doors and windows is the use of aluminum one because it has good climatic properties like it is resistant to corrosion, water, heat and chemicals.

Customer has a wide range of option of choosing the aluminum doors and windows because it is available in various forms, styles, shapes and color. This material is light in weight and is suitable for both indoor as well as outdoor applications. If you want complete privacy then you can opt for the bi-folding doors which will ensure that there is proper flow of light at the same time your privacy is also maintained.

Saving energy and money with energy efficient windows

Saving energy is very important. This lets you enjoy saving a lot of money and create a hazard free environment. You can bets save energy via installing windows that are energy efficient. There are many benefits of installing energy efficient windows.

The major benefit is that you will enjoy huge amount of energy savings. The saving will actually depend on whether you want to go for a single or double pane replacement of window. You can save anywhere between $124s and $460 on an annual basis for each pane window replacement. With double pane window replacement, you will save about $110. Most of the energy efficient windows come with gas filled between the panes. This helps in insulation of home which ultimately leads to huge energy savings. This is not all. You can also keep the internal air temperature preserved inside. It will also prevent outside air from inflowing the home.

Buying Energy Efficient Windows – The Ratings Game

Well to start with it can be said that the current situation in the world depicts that, we, as the citizen of the world act in a rather responsible manner so that the world becomes a much safer place to live in. with the rise in the global warming rate all the possible arrangements must be made so as to make sure that the emission rate is minimized. There is indeed a greater awareness amongst people in modern times than it was some times back.

All thanks to the modern technology that has indeed helped to enhance the chances of safeguarding the world. With the threat of global warming looming large all necessary efforts must be made. Energy efficient window is a step towards that direction. It helps to converse energy and thus helps in the cause of going green. It comes at an affordable rate and is easy to install. So, all must look to use it.

Buying Energy Efficient Windows


With increasing costs of energy, one should focus on getting windows which save energy efficiency. The parameters that affect the energy saving of a window include its heat loss coefficient, solar heat gain coefficient and visible transmittance which are how much light can pass through the windows. For cold regions, the solar heat gain coefficient should be higher to preserve solar energy and hence cut on the heating costs. Reflecting and tinted windows don’t help the cause either. Inert gas filings and low-E coatings are applied to windows to ensure there is not much heat loss.

Fiberglass and composite frames are used because of their insulating properties replacing aluminum which is a good conductor of heat. The fiberglass frames are also foam filled as foam is a very bad conductor of heat. Glazed glass can also help reducing heating costs by preventing heat loss. Double pane and triple pane windows although expensive, are used to save on energy costs.

Buying Energy Efficient Windows


Nowadays buying energy in efficient way can be relatively easy if you are aware of the ideal ratings. To get this information, you could check out some of the articles that will teach you more on that. The articles can be read from the internet on certain websites or other sources such as magazines. The article will explain in depth the relationship between the numerous ratings and how to identify the best for your needs.

Rating of an efficient window is mostly organized by non-profit organizations country wide that are always available to assist their customers. The organizations have members such as builders, utilities, window manufacturers among others. The performance of an efficient window is normally rated on the basis of a NFRC label. The label thus gives information about the type of window and rates its energy performance accordingly.

You need to understand the above information so as to enjoy efficient windows.

Some tips for framing window header

nullWhen it comes to framing the window, it is essential that you follow a few guidelines otherwise the window may not be able to bear the weight of the wall. The window should fit in the frame properly. Here are a few tips that will help you in preparing a frame apt for your window.

Make sure that the dimensions of the window frame are about 2 inches wider than the dimensions of the window which will fit in it.

When you are installing a window frame, a part of the wall gets removed. Thus, you should make some arrangements to provide that extra support. This is provided by window header. This header is made up of lumber of dimensions 2” by 6”.

Prepare two headers which are of the width of the window opening. Arrange these headers between the studs at the top.

After the header is put in its place, make sure that it is in level. Use carpenter’s level to ensure this. The next step is to nail the header into the wall properly.